1. Power the light and Set Up WiFi:

• Ensure the light is plugged in and powered on.
• Look for the Wi-Fi network WLED-AP.
• Connect using the password wled1234

 

2. Access the Captive Portal:

• You should see a captive portal after connecting.
• If you don’t see the captive portal after connecting to the network, open up an internet browser i.e., Chrome, Firefox, etc., and go to the address: 4.3.2.1
  
  
• Select 'WiFI SETTINGS'.
  
  
  
  

• Configure WiFi settings for your local network:
  • Scan for your network.
  • Select your network and enter your network password.
  • Make sure to Save & Connect.

 

1. Download the WLED App:

Available on iOS and Android.

2. Discover and Add Lights:

• Ensure your phone is on the same network as your light.
• Select the ‘+’ sign.
• Select ‘DISCOVER LIGHTS….’.
• Once ‘Found WLED!’ appears, you may save by selecting the checkmark.

3. Connect to your WLED Light:

• Select your WLED light.
  
  

4. Control your light with different effects, or use the presets:

You can use your WLED to control the different effects, or use the preset section to use the predefined presets for the light.